GuidesCleaning

Cleanroom cleaning: the method, step by step

Cleaning keeps a cleanroom in its class between tests. Done wrong, it moves particles around. Done right, it follows six rules.

Reading time
2 min
Checked
20 November 2026
A gloved hand wipes a stainless steel table with a cleanroom wipe
A non-shedding wipe on stainless steel. BlueThunderTechnologies, CC BY-SA 4.0.

The six rules

  1. Clean, then disinfect. A detergent lifts the residue. A disinfectant only works on a clean surface.
  2. Top to bottom. Ceiling, walls, equipment, floor last.
  3. Clean to dirty. Start at the cleanest point, usually the far end, and work toward the door.
  4. One direction. Straight, overlapping strokes, never circles. Fold the wiper to a fresh face after each pass.
  5. Two or three buckets. One for clean solution, one for dirty water, so the mop never goes back into the clean bucket.
  6. Gown like production. Cleaners follow the same gowning order and wear the same garments.

How often

Area Typical
Floors and touch points (door handles, benches, pass boxes) Every shift or daily
Walls, windows and doors Weekly
Ceilings, light fittings and return grilles Monthly
After maintenance, a spill or a breach Before production restarts

Typical for ISO 7 and ISO 8. Your risk assessment and monitoring results set your own schedule. ISO 14644-5 covers cleaning in operations; ISO 14644-13 covers cleaning surfaces to a set level.

Disinfectants in GMP plants

EU GMP Annex 1 asks for a sporicidal agent in the disinfection programme, and for proof that each agent works on your surfaces. In Grade A and B areas, disinfectants and detergents must be sterile. Most plants rotate a daily disinfectant with a sporicide on a set schedule.

What to ask a cleaning contractor

  • Are your crews trained and gowned to our SOP, with records we can audit?
  • Do you bring cleanroom-grade wipers, mops and IPA with lot certificates, or use ours?
  • Do you log every clean: area, time, agent, lot and name?
  • Can you cover night and weekend shifts without a gap?
  • Are you insured, and are your staff vetted for site access?

Questions

Can a normal cleaning company clean a cleanroom?

Only with cleanroom training, gowning and materials. A normal mop, cloth or vacuum adds particles. Ask for training records and a written method before they start.

What do you clean a cleanroom with?

A detergent or cleanroom cleaner first, then a disinfectant, often 70% IPA. GMP plants rotate a disinfectant with a sporicide. See consumables.

Who does cleanroom cleaning in Penang and Kulim?

Plants either train their own staff or use a contractor with cleanroom crews. Use the checklist on this page to judge one.