GuidesConsumables

Cleanroom consumables: wipers, IPA, tape, mops and gloves

A consumable is fit for a cleanroom when it sheds few particles, leaves little residue, and carries in no ions or microbes. Buy to your class.

Reading time
2 min
Checked
20 November 2026
Three folded cleanroom wipers, a spray bottle for IPA, a pair of blue nitrile gloves and a roll of cleanroom tape on a steel benchAI-generated image, not a product photo
Wipers, IPA, gloves and tape: the kit on most cleanroom benches.

What to buy, by class

Item ISO 4 to 5 ISO 6 to 8
Wipers 100% polyester knit, sealed edges (laser or ultrasonic) Polyester-cellulose blend
IPA 70% IPA, filtered to 0.2 µm; sterile in GMP Grade A and B 70% IPA
Tape Low-residue, low-outgassing cleanroom tape Low-residue cleanroom tape
Mops Polyester or microfibre head; autoclavable in GMP Polyester or microfibre head
Gloves Nitrile, packed in a cleanroom, rated for the class Nitrile, cleanroom-packed
Mats Tacky mat at every entry Tacky mat at every entry

Wipers

Knitted polyester sheds the least, so it suits ISO 4 and ISO 5. Polyester-cellulose blends absorb more and cost less, so they suit ISO 6 to ISO 8. Sealed edges shed fewer fibres than cut edges. Wipers come dry or wet with IPA. IEST-RP-CC004 is the usual test method.

IPA

Isopropyl alcohol cleans and disinfects. 70% IPA in water is the standard mix for surfaces: it kills microbes better than 99% and stays wet longer. Keep 99% for electronics. In sterile areas, buy IPA that is filtered and sterile, in bottles that do not let air back in.

Tape, mops and mats

  • Tape. Cleanroom tape marks floors and seals bags and panels. It leaves little residue when peeled.
  • Mops. Polyester or microfibre heads, with a two- or three-bucket system. GMP plants autoclave heads and handles. See cleaning.
  • Tacky mats. Peel off the top layer when it is dirty, and at least once a shift.

Questions

How is a cleanroom wiper different from a normal cloth?

It sheds far fewer fibres and particles, and it is washed and packed in a cleanroom. A normal cloth adds the dirt you are trying to remove.

Why 70% IPA and not 99%?

70% kills microbes better. The water helps the alcohol into the cell, and the mix dries slower, so the surface stays wet long enough. Use 99% on electronics, where water is unwanted.

What should a supplier give me?

A certificate of conformance for each lot, with particle and residue results. ISO 14644-18 describes how to judge whether a consumable is fit for a cleanroom.